Browse Title Index


 
Issue Title
 
Vol 5, No 1 (2019) Effects of Tungstate and Nitrite Ions as Corrosion Inhibitor for Cr-10Zr-10W Alloy in 0.5 M NaCl Solution Abstract
Jagadeesh Bhattarai, Durga Bhakta Pokharel, Dhruba Babu Subedi, Deepak VK
 
Vol 5, No 2 (2019) ENHANCEMENT OF MECHANICAL PROPERTIES OF ALLOY 61S BY REINFORCING NANO COMPOSITES Abstract
Roopsandeep Bammidi, K. Siva Prasad
 
Vol 5, No 2 (2019) Essential of bearing in materials engineering Abstract
Bangshidhar Goswami, S. K. Prasad, B. N. Choudhary, D. Das, A. Dasgupta, S. Prasad, G. S. Sharma, TPK. Gautam, S. P. Singh, Y. P. Rao, V. Sharma
 
Vol 4, No 1 (2018) Evaluating Photo-Catalytic Application of TiO2 Nano Particles Augmented With H2O2 for Mineralization of Pharmaceutical Effluent Abstract
Darshana Bhattia, Sachin Parikh
 
Vol 4, No 1 (2018) Evaluation of Corrosion kinetics of zirconium dioxide dispersion strengthened Aluminium metal matrix composites Abstract
Madhusudhan M, Mahesha k
 
Vol 1, No 2 (2015) Execution of Poly Coatings and Corrosion of Copper Abstract
Ramesh Sharma
 
Vol 8, No 2 (2022) Ferromagnetism in II-VI Diluted Magnetic Semiconductor, Zn0.96Mn0.04O Nanostructures by Green’s Theorem Abstract
Gizachew Diga Milki
 
Vol 2, No 2 (2016) Investigation of Effect of Clearance between Die and Punch in Deep Drawing Process Abstract
Chandra Pal Singh, Geeta Agnihotri
 
Vol 6, No 1 (2020) INVESTIGATIONAL STUDIES ON MECHANICAL PROPERTIES FOR FRPS COMPOSITES Abstract
Roopsandeep Bammidi, K. Siva Prasad
 
Vol 6, No 2 (2020) MANUFACTURING AND TESTING OF CNT BLENDED NAVAL BRASS Abstract
M. Venkatesh, M. V. KrishnaMohan, T. MahindraRao
 
Vol 6, No 1 (2020) Mechanical properties of Al-Si17Cu3.5Mg0.8 alloy fabricated by stir casting with UV and new CRSS casting process with and without T6 condition Abstract
N.D. Malleswararao K, I.N. Niranjan Kumar, Bh. Nagesh
 
Vol 3, No 1 (2017) Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V Abstract   PDF
Rashmi Sinha
 
Vol 1, No 1 (2015) METALLURGY OF INVESTMENT CASTING TECHNOLOGY Abstract
Thoguluva Raghavan Vijayaram, M Senthilkumar
 
Vol 2, No 1 (2016) Modelling the Parameters Affecting Interconnection of Grids Using ISM-MICMAC Approach Abstract
Nikhil Dev, Rajesh Attri
 
Vol 7, No 2 (2021) Modern Ceramic Compose to Pervade Electronics Abstract
Bangshidhar Goswami
 
Vol 4, No 2 (2018) Modern Gas Turbine System Materials - A Review Abstract
Nikhil Dev, Rajesh Attri, Sandeep Kumar
 
Vol 8, No 2 (2022) Modern Material Concept to Produce Low-Loss Non- Oriented Electric Alloys Abstract
Faraz Ahmad
 
Vol 6, No 2 (2020) MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL Abstract
Elias George K., A. Mathiazhagan
 
Vol 8, No 2 (2022) Nanocoating and Electrospray Techniques Use to Mitigation Corrosion Sculptures Abstract
Rajesh Kumar Singh, K. Hema, Madhuram Ayush
 
Vol 6, No 1 (2020) Optimization of Active Cutting Power Consumption by Taguchi Method for Rough Turning of Alloy Steel Abstract
Raman Kumar, Paramjit Singh Bilga, Sehijpal Singh
 
Vol 2, No 2 (2016) Optimization Process Parameters of Manganese Phosphate coating developed on En-19 Steels by Statistical Design of Experiment Abstract
Sunil D. Kahar
 
Vol 5, No 2 (2019) Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere Abstract
Rajesh Kumar Singh, Mithilesh Kumar Singh, Noor Alam
 
Vol 7, No 2 (2021) Partial Replacement of Coarse Aggregate with Coconut Shell Abstract
Ankit Kumar Pandey, Chandan Kumar, Avanish Yadav, Vaibhav Mishra, Amit Kumar
 
Vol 7, No 1 (2021) Performance Enhancement and Improvement of Energy Efficiency in Evacuated Tube Heat Pipe Collector with Nanocomposite: A Review Abstract
Shamkant Desale, Premendra Bansod
 
Vol 7, No 1 (2021) Polycarbonate/ABS Alloys: Production, Testing and Applications—An Overview Abstract
Sandeep Rai
 
26 - 50 of 70 Items << < 1 2 3 > >>