Open Access Open Access  Restricted Access Subscription or Fee Access

Medicinal Application of Nano Composites of Al 8081 Alloy/Tib2 in Acid Chloride and Neutral Chloride Mediums at Laboratory Temperature

Pruthviraj R D

Abstract


Nanomaterials are at the leading edge of the rapidly growing subject of nanotechnology. Their precise size-dependent homes make these materials advanced and imperative in any areas of human activity. This brief review tries to summarise the maximum latest developments in the subject of carried out nanomaterials, specially their application in biology and medicine, and discusses their commercial is at ion prospects. This paper evaluates corrosion properties of TiB2/Al8081 alloy immediately bought from the industry. The corrodent used for the test is different concentration of acid chloride & Neutral Chloride mediums that is 0.1N, 0.05N, 0.075N, 0.025N of HCl & 3.5%, 0.35%, 0.035% NaCl respectively. As a concentration of acid chloride & Neutral Chloride medium increases the corrosion rate is also increases. All the test are conducted at laboratory temp. The weight loss potentiodynamic and EIS was studies in all the cases the corrosion rate is decreases an attempt is made in the paper to provide explanation for these phenomena.


Keywords


AA 8081, HCl, NaCl, immersion test, TiB2

Full Text:

PDF

References


HE Deve,C McCullough, Continuous-fiber reinforced Al composites: A new generation, JOM vol.47, pp.33–37, 1995J.

D Poston and WD Horne. Discontiguous OFDM considerations for dynamic spectrum access in TV channels. Proc. IEEE Dy SPAN, 2005.

VV Vikulin, IY Kelina, AS Shatalin, LN Rusanova, Advanced ceramic

structural materials, Refract. Ind. Ceram. Vol 45, pp 383–386, 2004

R Asthana, M Singh, N Sobczak, The role of wetting and reactivity in infiltration of ceramic-metal composites, Ceram. Eng. Sci. Proc. Vol. 26, pp. 249–261, 2005.

A Vassel, Continuous fibre reinforced titanium and aluminium composites: A comparison, Mater. Sci. Eng. A Vol. 263, pp. 305–313, 1999.

S Ezhil Vannan and Paul Vizhian Simson, Corrosion Behaviour of Short Basalt Fiber Reinforced with Al7075 Metal Matrix Composites in Sodium Chloride Alkaline Medium, J Chem. Eng. Chem. Res. Vol. 1(2), pp. 122–131, 2014.

JMG DeSalazar, A Urefia, S Mazanedo and M Barrens, Corrosion behaviour of AA6061 and AA7075 reinforced with Al2O3 particulates in

aerated 3.5%chloride solution potentiodynamic measurements and microstructure evaluation, Corrosion Science, Vol 41, pp529–545,1999.

JE Castle, L Sun and H Yan, The use of scanning auger microscopy to locate cathodic centers in TiB2/Al6061 MMC And to determine

the current density at which they operate, Corrosion Science, Vol. 36(6), pp. 1093–1110, 1994.

TPD Rajan, RM Pillai, BC Pai, Reinforcement coatings and interfaces in aluminium metal matrix composites, J Mater. Sci. Vol. 33, pp. 3491–3503, 1998.

J Rodel, H Prielipp, M Knechtel, N Claussen, Better ceramics through

metal Modification, Trans. Mater. Res. Soc. Jpn. Vol. 19B, pp. 763– 776, 1994.

RD Pruthviraj, PV Krupakara, BS Parashuram, Effect of reinforcement content on the corrosion properties of aluminium 7075/TiB2 composites in equimolar solution of sodium hydroxide and sodium chloride solution, Bulletin of Electrochemistry, Vol. 22(6), pp. 281–284, 2006.

PV Krupakara, Corrosion Characterization of Al6061/Red Mud Metal

Matrix Composites, Portugaliae Electro chimica Acta. Vol. 31(3), pp. 157 164, 2013.

Wu. Jianxin, Liu Wei Li Peng Xing, Wurenjie. Effect of matrix alloying elements on the corrosion resistance of C/Al composites materials, Jr. of.

Mat. Sci. Lett. Vol. 12, pp. 1500–1501, 1993.


Refbacks

  • There are currently no refbacks.