Nanostructured Resistance in Morden Metallurgical Alloy Mechanisms Mitigation Strategies
DOI:
https://doi.org/10.37628/ijma.v9i2.1082Abstract
In modern metallurgy, the integration of nanostructured materials into alloys has emerged as a significant advancement, offering enhanced mechanical properties, thermal stability, and resistance to corrosion. This paper explores the mechanisms by which nanostructured alloys exhibit superior resistance compared to their conventional counterparts. Key mechanisms include grain boundary strengthening, dispersion strengthening, and the formation of nanophases that impede dislocation motion. Additionally, the role of interface characteristics and the distribution of nanostructured particles in mitigating common metallurgical challenges is discussed. Various strategies for the fabrication and optimization of these nanostructured alloys are also examined, emphasizing the importance of precise control over microstructural features. Through a comprehensive review of current research and experimental findings, this study highlights the potential of nanostructured alloys in advancing metallurgical applications and outlines future directions for mitigating resistance challenges in alloy design and application. To produce reliable and repeatable nanostructured alloys, the integration of sophisticated manufacturing techniques is considered, including severe plastic deformation and additive manufacturing.
References
Ahmadkhaniha D, Huang Y, Jaskari M, Järvenpää A, Heydarzadeh Sohi M, Zanella C, Pentti Karjalainen L, Langdon TG (2018) Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg. J Mater Sci 53:16585–16597. https://doi.org/10.1007/s10853-018-2779-1
Bagherpour E, Pardis N, Reihanian M et al (2019) An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications. Int J Adv Manuf Technol 100:1647–1694. https://doi.org/10.1007/s00170-018-2652-z
Beyerlein IJ, Knezevic M (2020) Mesoscale, microstructure-sensitive modeling for Interface-dominated, nanostructured materials. In: Andreoni W, Yip S (eds) Handbook of materials modeling. Springer, Cham. https://doi.org/10.1007/978-3-319-44677-6_82
Brandl C (2019) Molecular dynamics simulations of nanopolycrystals. In: Hsueh CH et al (eds) Handbook of mechanics of materials. Springer, Singapore. https://doi.org/10.1007/978-981-10-6884-3_12
Firstov SA, Rogul TG, Shut OA (2018) Hardening in the transition to nanocrystalline state in pure metals and solid solutions (ultimate hardening). Powder Metal Met Ceram 57:161–174. https://doi.org/10.1007/s11106-018-9964-2
Firstov SA, Rogul TG, Shut OA (2018) Hardening in the transition to nanocrystalline state in pure metals and solid solutions (ultimate hardening). Powder Metal Met Ceram 57:161–174. https://doi.org/10.1007/s11106-018-9964-2
Gupta RK, Murty B, Birbilis N (2017) Mechanical properties of high-energy ball milled nanocrystalline Al alloys. In: An overview of high-energy ball milled nanocrystalline aluminum alloys, Springerbriefs in materials. Springer, Cham. https://doi.org/10.1007/978-3-319-57031-0_4
Harin EV, Sheftel EN, Tedzhetov VA (2018) Approximation of the influence of effective magnetic parameters on the coercivity of Iron-based nanocrystalline films. Tech Phys Lett 44:420–423. https://doi.org/10.1134/S106378501805019X
Mohamed FA (2020) Creep and superplasticity: evolution and rationalization. Adv Eng Mater 22:1900532. https://doi.org/10.1002/adem.201900532
Protsenko VS, Danilov FI (2020) Current trends in electrodeposition of electrocatalytic coatings. In: Inamuddin, Boddula R, Asiri A (eds) Methods for electrocatalysis. Springer, Cham. https://doi.org/10.1007/978-3-030-27161-9_11
Song Y, Zhang Z, Gao D, Zhang H, Kim H-S (2018) Effects of friction on heterogeneous deformation characteristics of interstitial-free steels during the torsion stage of high pressure torsion. In 3rd international conference on control, automation and artificial intelligence (CAAI 2018), pp 186–189
hang W, Gao Y, Nieh TG (2018) Competing grain boundary and interior deformation mechanisms with varying sizes. In: Hsueh CH et al (eds) Handbook of mechanics of materials. Springer, Singapore. https://doi.org/10.1007/978-981-10-6855-3_75-1
Zhang Z, Ódor É, Farkas D et al (2020) Dislocations in grain boundary regions: the origin of heterogeneous microstrains in nanocrystalline materials. Metal Mater Trans A 51:513–530. https://doi.org/10.1007/s11661-019-05492-7
Zhou H, Qu S (2019) Mechanical properties of nanostructured metals: molecular dynamics studies. In: Hsueh CH et al (eds) Handbook of mechanics of materials. Springer, Singapore. https://doi.org/10.1007/978-981-10-6884-3_19
Zhou X, Li XY, Lu K (2018) Enhanced thermal stability of nanograined metals below a critical grain size. Science 360:526–530. https://doi.org/10.1126/science.aar6941
Wu B, Zhang J, Zhang L, Pyoung Y-S, Murakami R-I (2014) Effect of ultrasonic nanocrystal surface modification on surface and fatigue properties of quenching and tempering S45C steel. Appl Surf Sci 321:318–330. https://doi.org/10.1016/j.apsusc.2014.09.068
Andrievski RA, Khatchoyan AV (2016) Grain growth and nanomaterials behavior at high temperatures. In: Nanomaterials in extreme environments, Springer series in materials science, vol 230. Springer, Cham. https://doi.org/10.1007/978-3-319-25331-2_2
Bober DB, Khalajhedayati A, Kumar M et al (2016) Grain boundary character distributions in nanocrystalline metals produced by different processing routes. Metal Mater Trans A 47:1389–1403. https://doi.org/10.1007/s11661-015-3274-9
Clement K, Iseli A, Karote D, Cremer J, Rajagopalan S (2012) Nanostructured materials: industrial applications. In: Kent J (ed) Handbook of industrial chemistry and biotechnology. Springer, Boston. https://doi.org/10.1007/978-1-4614-4259-2_9
Dutta RK, Malet L, Hermans MJM, Godet S, Richardson IM (2015) Formation of nanostructures in severely deformed high-strength steel induced by high-frequency ultrasonic impact treatment. Met Trans 46A:813–830. https://doi.org/10.1007/s11661-014-2658-6
