Ti3C2Tx Based Batteries and Super Capacitors
Keywords:
2D Material, MXene, titanium carbide, batteries, super capacitorAbstract
A rise in energy necessities of the modern era entails the most actual, cost-effective, and long-lasting supplies for electrical energy sources. Because of the exceptional chemical and physical properties of 2D materials and their broad range of applications in energy storage devices, photo-catalysis, electronics, bio-sensors, gas sensors, water purification, and other fields, 2D MXene-based
nanomaterials have attracted a lot of attention. However, MXenes and their derivatives have plentiful intrinsic restrictions in terms of energy storage applications. The nano-engineering of these 2D materials is being considered widely in order to improve their performance for real-world applications.
This review article discusses the recent research and progress on Titanium Carbide nanostructures, with an emphasis on their preparation methods, properties, and applications for energy storage devices such as batteries and super-capacitors. In recent years, Titanium Carbide (Ti3C2Tx) has emerged as a
promising 2D material for various applications due to its unique properties. The preparation methods of Ti3C2Tx nanostructures play a crucial role in determining their properties and performance in energy storage devices. Various techniques, such as chemical etching, intercalation, and exfoliation, have been employed to fabricate Ti3C2Tx nanostructures with different morphologies and properties. The properties of Ti3C2Tx nanostructures, including their high surface area, excellent electrical conductivity, and good mechanical strength, make them ideal candidates for energy storage applications. These properties allow for high energy and power density, fast charge-discharge rates, and long cycle life in batteries and super-capacitors. In addition to energy storage devices, Ti3C2Tx nanostructures have shown great potential in other applications such as sensors, catalysis, and electromagnetic interference shielding. The unique properties of Ti3C2Tx nanostructures make them versatile materials for various technological applications.
References
Bonifacio, B.V., et al., Nanotechnology-based drug delivery systems and herbal medicines: a review. International journal of nanomedicine, 2014. 9: p. 1.
Brakmane, G., M. Winslet, and A. Seifalian, Systematic review: the applications of nanotechnology in gastroenterology. Alimentary pharmacology & therapeutics, 2012. 36(3): p. 213-221.
Durán, N. and P.D. Marcato, Nanobiotechnology perspectives. Role of nanotechnology in the food industry: a review. International Journal of Food Science & Technology, 2013. 48(6): p. 1127-1134.
Karst, D. and Y. Yang, Potential Advantages and Risks of Nanotechnology for Textiles. AATCC review, 2006. 6(3).
Novoselov, K.S., et al., Electric field effect in atomically thin carbon films. science, 2004. 306(5696): p. 666-669.
Sanchez, F. and K. Sobolev, Nanotechnology in concrete–a review. Construction and building materials, 2010. 24(11): p. 2060-2071.
Wong, Y., et al., Selected applications of nanotechnology in textiles. AUTEX Research Journal, 2006. 6(1): p. 1-8.
Liu, C., et al., Advanced materials for energy storage. Advanced materials, 2010. 22(8): p. E28-E62.
Panwar, N., S. Kaushik, and S. Kothari, Role of renewable energy sources in environmental protection: A review. Renewable and sustainable energy reviews, 2011. 15(3): p. 1513-1524.
Kaur, G., T. Singh, and A. Kumar, Nanotechnology: A review. Inter J Edu and Appli Res, 2012. 2(1): p. 50-53.
Hornyak, G.L., et al., Introduction to nanoscience. 2008: CRC press.
Liang, J., et al., Electrospun MoO 2@ NC nanofibers with excellent Li+/Na+ storage for dual applications. Science China Materials, 2018. 61(1): p. 30-38.
Hornyak, G.L., et al., Introduction to nanoscience and nanotechnology. 2008: CRC press.
Ghidiu, M., et al., Conductive two-dimensional titanium carbide ‘clay’with high volumetric capacitance. Nature,2014. 516(7529): p. 78-81.
Lin, X., et al., High temperature electrical energy storage: advances, challenges, and frontiers. Chemical Society Reviews, 2016. 45(21): p. 5848-5887.
Riaz, A., et al., Review on Comparison of Different Energy Storage Technologies Used in Micro-Energy Harvesting, WSNs, Low-Cost Microelectronic Devices: Challenges and Recommendations. Sensors, 2021. 21(15): p. 5041.
Ling, Z., et al., Flexible and conductive MXene films and nanocomposites with high capacitance. Proceedings of the National Academy of Sciences, 2014. 111(47): p. 16676-16681.
Barsoum, M.W., MAX phases: properties of machinable ternary carbides and nitrides. 2013: John Wiley & Sons.
Anasori, B., et al., Two-dimensional, ordered, double transition metals carbides (MXenes). ACS nano, 2015. 9(10): p. 9507-9516.
Gogotsi, Y., Chemical vapour deposition: transition metal carbides go 2D. Nature materials, 2015. 14(11): p. 1079-1080.
Naguib, M., et al., Two-dimensional transition metal carbides. ACS nano, 2012. 6(2): p. 1322-1331.
Wang, H.-W., et al., Resolving the structure of ti3c2t x mxenes through multilevel structural modeling of the atomic pair distribution function. Chemistry of Materials, 2016. 28(1): p. 349-359.
Naguib, M., et al., Two‐dimensional nanocrystals produced by exfoliation of Ti3AlC2. Advanced materials, 2011. 23(37): p. 4248-4253.
Naguib, M., et al., Two‐Dimensional Nanocrystals: Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2 (Adv. Mater. 37/2011). Advanced Materials, 2011. 23(37): p. 4207-4207.
Naguib, M., et al., 25th anniversary article: MXenes: a new family of two‐dimensional materials. Advanced materials, 2014. 26(7): p. 992-1005.
Mashtalir, O., et al., Intercalation and delamination of layered carbides and carbonitrides. Nature communications, 2013. 4(1): p. 1-7.
Mashtalir, O., et al., Amine‐assisted delamination of Nb2C MXene for Li‐ion energy storage devices. Advanced Materials, 2015. 27(23): p. 3501-3506.
Naguib, M., et al., Large-scale delamination of multi-layers transition metal carbides and carbonitrides “MXenes”. Dalton transactions, 2015. 44(20): p. 9353-9358.
Lin, Z., et al., Carbon nanofiber bridged two-dimensional titanium carbide as a superior anode for lithium-ion batteries. Journal of Materials Chemistry A, 2015. 3(27): p. 14096-14100.
Xiao, Y., J.-Y. Hwang, and Y.-K. Sun, Transition metal carbide-based materials: synthesis and applications in electrochemical energy storage. Journal of Materials Chemistry A, 2016. 4(27): p. 10379-10393.
Ahmed, B., et al., H 2 O 2 assisted room temperature oxidation of Ti 2 C MXene for Li-ion battery anodes. Nanoscale, 2016. 8(14): p. 7580-7587.
Shi, L. and T. Zhao, Recent advances in inorganic 2D materials and their applications in lithium and sodium
batteries. Journal of Materials Chemistry A, 2017. 5(8): p. 3735-3758.
Wang, F., et al., An organ-like titanium carbide material (MXene) with multilayer structure encapsulating hemoglobin for a mediator-free biosensor. Journal of The Electrochemical Society, 2014. 162(1): p. B16.
Ling, C., et al., Transition metal‐promoted V2CO2 (MXenes): a new and highly active catalyst for hydrogen evolution reaction. Advanced science, 2016. 3(11): p. 1600180.
Zhao, S., W. Kang, and J. Xue, MXene nanoribbons. Journal of Materials Chemistry C, 2015. 3(4): p. 879-888.
Srimuk, P., et al., MXene as a novel intercalation-type pseudocapacitive cathode and anode for capacitive deionization. Journal of Materials Chemistry A, 2016. 4(47): p. 18265-18271. 20
Xia, Q.X., et al., High volumetric energy density annealed-MXene-nickel oxide/MXene asymmetric supercapacitor. RSC advances, 2017. 7(18): p. 11000-11011.
Ding, B., et al., A two-step etching route to ultrathin carbon nanosheets for high performance electrical double layer capacitors. Nanoscale, 2016. 8(21): p. 11136-11142.
Mariano, M., et al., Solution-processed titanium carbide MXene films examined as highly transparent conductors.Nanoscale, 2016. 8(36): p. 16371-16378.
Gao, G., et al., Monolayer MXenes: promising half-metals and spin gapless semiconductors. Nanoscale, 2016.
(16): p. 8986-8994.
Eklund, P., et al., Ta4AlC3: Phase determination, polymorphism and deformation. Acta materialia, 2007. 55(14): p. 4723-4729.
Li, C., et al., On the synthesis of low-cost, titanium-based MXenes. J. Ceram. Sci. Technol, 2016. 7(3): p. 301-306.
Vadchenko, S., et al., Self-propagating high-temperature synthesis in the Ti-Si-C system: Features of product patterning. Nanotechnologies in Russia, 2015. 10(1): p. 67-74.
Feng, L., et al., Structures and mechanical and electronic properties of the Ti 2 CO 2 MXene incorporated with neighboring elements (Sc, V, B and N). Journal of Electronic Materials, 2017. 46(4): p. 2460-2466.
Guan, C. and N. Sun, Synthesis and reaction evolution of high-purity Ti2SC powder by microwave hybrid heating at low temperature. Advances in Applied Ceramics, 2016. 115(8): p. 499-504.
Kurtoglu, M., et al., First principles study of two-dimensional early transition metal carbides. MRS Communications, 2012. 2(4): p. 133-137.
Wei, Y., et al., Advances in the Synthesis of 2D MXenes. Advanced Materials, 2021. 33: p. 2103148.
Xie, Y., et al., Role of surface structure on Li-ion energy storage capacity of two-dimensional transition-metal carbides. Journal of the American Chemical Society, 2014. 136(17): p. 6385-6394.
Yu, Y.-X., Prediction of mobility, enhanced storage capacity, and volume change during sodiation on interlayer- expanded functionalized Ti3C2 MXene anode materials for sodium-ion batteries. The Journal of Physical Chemistry C, 2016. 120(10): p. 5288-5296.
Ji, X., et al., Probing the electrochemical capacitance of MXene nanosheets for high-performance pseudocapacitors. Physical Chemistry Chemical Physics, 2016. 18(6): p. 4460-4467.
Wu, F., et al., Theoretical understanding of magnetic and electronic structures of Ti3C2 monolayer and its derivatives. Solid State Communications, 2015. 222: p. 9-13.
Tang, Q., Z. Zhou, and P. Shen, Are MXenes promising anode materials for Li ion batteries? Computational studies on electronic properties and Li storage capability of Ti3C2 and Ti3C2X2 (X= F, OH) monolayer. Journal of the American Chemical Society, 2012. 134(40): p. 16909-16916.
Tang, Q., Z. Zhou, and P. Shen, Are MXenes Promising Anode Materials for Li Ion Batteries? Computational Studies on Electronic Properties and Li Storage Capability of Ti3C2 and Ti3C2X2 (X = F, OH) Monolayer. Journal of the American Chemical Society, 2012. 134(40): p. 16909-16916.
Shi, C., et al., Structure of nanocrystalline Ti3C2 MXene using atomic pair distribution function. Phys Rev Lett, 2014. 112(12): p. 125501.
Shi, C., et al., Structure of Nanocrystalline Ti3C2 MXene Using Atomic Pair Distribution Function. Physical review letters, 2014. 112: p. 125501.
Wang, X., et al., Atomic-scale recognition of surface structure and intercalation mechanism of Ti3C2X. Journal of the American Chemical Society, 2015. 137(7): p. 2715-2721.
Kurtoglu, M., et al., First principles study of two-dimensional early transition metal carbides. Mrs Communications, 2012. 2: p. 133-137.
Seredych, M., et al., High-temperature behavior and surface chemistry of carbide MXenes studied by thermal analysis. Chemistry of Materials, 2019. 31(9): p. 3324-3332.
Barsoum, M.W. and M. Radovic, Elastic and mechanical properties of the MAX phases. Annual review of materials research, 2011. 41: p. 195-227.
Eklund, P., et al., The Mn+ 1AXn phases: Materials science and thin-film processing. Thin Solid Films, 2010. 518(8): p. 1851-1878.
Anasori, B., M.R. Lukatskaya, and Y. Gogotsi, 2D metal carbides and nitrides (MXenes) for energy storage. Nature Reviews Materials, 2017. 2(2): p. 1-17.
Liu, Y., et al., Synthesis and tribological property of Ti 3 C 2 T x nanosheets. Journal of Materials Science, 2017.52(4): p. 2200-2209.
Biswas, S. and P.S. Alegaonkar, MXene: Evolutions in Chemical Synthesis and Recent Advances in Applications. Surfaces, 2022. 5(1): p. 1-34.
Lakhe, P., et al., Process safety analysis for Ti3C2T x MXene synthesis and processing. Industrial & Engineering Chemistry Research, 2019. 58(4): p. 1570-1579.
Alhabeb, M., et al., Selective etching of silicon from Ti3SiC2 (MAX) to obtain 2D titanium carbide (MXene). Angewandte Chemie, 2018. 130(19): p. 5542-5546.
Naguib, M., et al., Two‐Dimensional Materials: 25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials (Adv. Mater. 7/2014). Advanced Materials, 2014. 26(7): p. 982-982.
Mashtalir, O., et al., Kinetics of aluminum extraction from Ti3AlC2 in hydrofluoric acid. Materials Chemistry and Physics, 2013. 139(1): p. 147-152.
Anasori, B., et al., Control of electronic properties of 2D carbides (MXenes) by manipulating their transition metal layers. Nanoscale Horizons, 2016. 1(3): p. 227-234.21
Hoffman, E.N., et al., Micro and mesoporosity of carbon derived from ternary and binary metal carbides. Microporous and Mesoporous Materials, 2008. 112(1-3): p. 526-532.
Presser, V., M. Heon, and Y. Gogotsi, Carbide‐derived carbons–from porous networks to nanotubes and graphene. Advanced Functional Materials, 2011. 21(5): p. 810-833.
Zhu, J., et al., Rapid one-step scalable microwave synthesis of Ti 3 C 2 T x MXene. Chemical Communications, 2021. 57(94): p. 12611-12614.
Wang, X., et al., A new etching environment (FeF 3/HCl) for the synthesis of two-dimensional titanium carbide MXenes: a route towards selective reactivity vs. water. Journal of Materials Chemistry A, 2017. 5(41): p. 22012- 22023.
Xuan, J., et al., Organic‐base‐driven intercalation and delamination for the production of functionalized titanium carbide nanosheets with superior photothermal therapeutic performance. Angewandte Chemie, 2016. 128(47): p. 14789-14794.
Feng, A., et al., Two-dimsional MXene Ti3C2 produced by exfoliation of Ti3AlC2en. Materials & Design, 2017. 114: p. 161-166.
Cheng, L., et al., Two-Dimensional Transition Metal MXene-Based Photocatalysts for Solar Fuel Generation. The journal of physical chemistry letters, 2019. 10(12): p. 3488-3494.
Halim, J., et al., Transparent conductive two-dimensional titanium carbide epitaxial thin films. Chemistry of Materials, 2014. 26(7): p. 2374-2381.
Halim, J., et al., Synthesis and characterization of 2D molybdenum carbide (MXene). Advanced FunctionalMaterials, 2016. 26(18): p. 3118-3127.
Seh, Z.W., et al., Two-dimensional molybdenum carbide (MXene) as an efficient electrocatalyst for hydrogen evolution. ACS Energy Letters, 2016. 1(3): p. 589-594.
Ghidiu, M., et al., Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance. Nature, 2014. 516(7529): p. 78-81.
Ghidiu, M., et al., Ion-exchange and cation solvation reactions in Ti3C2 MXene. Chemistry of Materials, 2016. 28(10): p. 3507-3514.
Peng, J., et al., Surface and heterointerface engineering of 2D MXenes and their nanocomposites: insights into electro-and photocatalysis. Chem, 2019. 5(1): p. 18-50.
Karlsson, L.H., et al., Atomically resolved structural and chemical investigation of single MXene sheets. Nano letters, 2015. 15(8): p. 4955-4960.
Wang, L., et al., Synthesis and electrochemical performance of Ti 3 C 2 T x with hydrothermal process. Electronic Materials Letters, 2016. 12(5): p. 702-710.
Alhabeb, M., et al., Guidelines for synthesis and processing of two-dimensional titanium carbide (Ti3C2T x MXene). Chemistry of Materials, 2017. 29(18): p. 7633-7644.
Xu, C., et al., Large-area high-quality 2D ultrathin Mo 2 C superconducting crystals. Nature materials, 2015. 14(11): p. 1135-1141.
Khazaei, M., et al., Nearly free electron states in MXenes. Physical Review B, 2016. 93(20): p. 205125.
Khazaei, M., et al., Novel electronic and magnetic properties of two‐dimensional transition metal carbides and nitrides. Advanced Functional Materials, 2013. 23(17): p. 2185-2192.
Berdiyorov, G., Effect of surface functionalization on the electronic transport properties of Ti3C2 MXene. EPL (europhysics Letters), 2015. 111(6): p. 67002.
Wang, Y., et al., MXenes: focus on optical and electronic properties and corresponding applications. Nanophotonics, 2020. 9(7): p. 1601-1620.
Sinopoli, A., et al., Electrocatalytic/photocatalytic properties and aqueous media applications of 2D transition metal carbides (MXenes). Current Opinion in Solid State and Materials Science, 2019. 23(5): p. 100760.
Xie, Y., et al., Prediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries. ACS Nano, 2014. 8(9): p. 9606-9615.
Harris, K.J., et al., Direct Measurement of Surface Termination Groups and Their Connectivity in the 2D MXene V2CTx Using NMR Spectroscopy. The Journal of Physical Chemistry C, 2015. 119(24): p. 13713-13720.
Wang, H.-W., et al., Resolving the Structure of Ti3C2Tx MXenes through Multilevel Structural Modeling of the Atomic Pair Distribution Function. Chemistry of Materials, 2016. 28(1): p. 349-359.
Lashgari, H., et al., Electronic and optical properties of 2D graphene-like compounds titanium carbides and nitrides: DFT calculations. Solid State Communications, 2014. 195: p. 61-69.
Magne, D., et al., Spectroscopic evidence in the visible-ultraviolet energy range of surface functionalization sites in the multilayer ${mathrm{Ti}}_{3}{mathrm{C}}_{2}$ MXene. Physical Review B, 2015. 91(20): p. 201409.
Zhao, S., W. Kang, and J. Xue, Manipulation of electronic and magnetic properties of M2C (M= Hf, Nb, Sc, Ta, Ti,
V, Zr) monolayer by applying mechanical strains. Applied Physics Letters, 2014. 104(13): p. 133106.
Feng, L., et al., Structures and mechanical and electronic properties of the Ti2CO2 MXene incorporated with
neighboring elements (Sc, V, B and N). Journal of Electronic Materials, 2017. 46(4): p. 2460-2466.
Zhou, Y., et al., Electronic and Transport Properties of Ti2CO2 MXene Nanoribbons. The Journal of Physical
Chemistry C, 2016. 120(30): p. 17143-17152.
Zha, X.-H., et al., Role of the surface effect on the structural, electronic and mechanical properties of the carbide
MXenes. EPL (Europhysics Letters), 2015. 111(2): p. 26007.
Yu, X.-f., et al., The band gap modulation of monolayer Ti 2 CO 2 by strain. RSC Advances, 2015. 5(39): p. 30438-
Hu, T., et al., Anisotropic electronic conduction in stacked two-dimensional titanium carbide. Scientific reports,
5: p. 16329.
Lipatov, A., et al., Elastic properties of 2D Ti3C2Tx MXene monolayers and bilayers. Science advances, 2018. 4(6):
p. eaat0491.
Dillon, A.D., et al., Highly conductive optical quality solution‐processed films of 2D titanium carbide. Advanced
Functional Materials, 2016. 26(23): p. 4162-4168.
Miranda, A., et al., Electronic properties of freestanding Ti3C2Tx MXene monolayers. Applied Physics Letters,
108(3): p. 033102.
Xu, J., et al., MXene electrode for the integration of WSe2 and MoS2 field effect transistors. Advanced Functional
Materials, 2016. 26(29): p. 5328-5334.
Lai, S., et al., Surface group modification and carrier transport properties of layered transition metal carbides
(Ti2CTx, T:–OH,–F and–O). Nanoscale, 2015. 7(46): p. 19390-19396.
Hart, J.L., et al., Control of MXenes’ electronic properties through termination and intercalation. Nature
communications, 2019. 10(1): p. 522.
Cepellotti, A., et al., Phonon hydrodynamics in two-dimensional materials. Nature communications, 2015. 6(1):
p. 1-7.
Osti, N.C., et al., Effect of metal ion intercalation on the structure of MXene and water dynamics on its internal
surfaces. ACS applied materials & interfaces, 2016. 8(14): p. 8859-8863.
Sang, X., et al., Atomic Defects in Monolayer Titanium Carbide (Ti3C2T x) MXene. ACS nano, 2016. 10(10): p.
-9200.
Shein, I. and A. Ivanovskii, Graphene-like titanium carbides and nitrides Tin+ 1Cn, Tin+ 1Nn (n= 1, 2, and 3) from
de-intercalated MAX phases: First-principles probing of their structural, electronic properties and relative
stability. Computational Materials Science, 2012. 65: p. 104-114.
Shein, I. and A. Ivanovskii, Planar nano-block structures Tin+ 1Al0. 5Cn and Tin+ 1Cn (n= 1, and 2) from MAX
phases: Structural, electronic properties and relative stability from first principles calculations. Superlattices and
microstructures, 2012. 52(2): p. 147-157.
Khazaei, M., et al., Two-dimensional molybdenum carbides: potential thermoelectric materials of the MXene
family. Physical Chemistry Chemical Physics, 2014. 16(17): p. 7841-7849.
Zhang, X., et al., Computational studies on structural and electronic properties of functionalized MXene
monolayers and nanotubes. Journal of Materials Chemistry A, 2015. 3(9): p. 4960-4966.
Li, X., et al., Intriguing electronic properties of two-dimensional MoS2/TM2CO2 (TM= Ti, Zr, or Hf) hetero-
bilayers: type-II semiconductors with tunable band gaps. Nanotechnology, 2015. 26(13): p. 135703.
Hu, J., et al., Investigations on Nb 2 C monolayer as promising anode material for Li or non-Li ion batteries from
first-principles calculations. RSC advances, 2016. 6(33): p. 27467-27474.
Gandi, A.N., H.N. Alshareef, and U. Schwingenschlögl, Thermoelectric performance of the mxenes M2Co2 (M= Ti,
Zr, or Hf). Chemistry of Materials, 2016. 28(6): p. 1647-1652.
Gan, L.-Y., et al., First-principles analysis of MoS 2/Ti 2 C and MoS 2/Ti 2 C Y 2 (Y= F and OH) all-2D
semiconductor/metal contacts. Physical Review B, 2013. 87(24): p. 245307.
Eames, C. and M.S. Islam, Ion intercalation into two-dimensional transition-metal carbides: global screening for
new high-capacity battery materials. Journal of the American Chemical Society, 2014. 136(46): p. 16270-16276.
Berdiyorov, G.R., M.E. Madjet, and K.A. Mahmoud, Ionic sieving through Ti3C2 (OH) 2 MXene: first-principles
calculations. Applied Physics Letters, 2016. 108(11): p. 113110.
Ashton, M., R.G. Hennig, and S.B. Sinnott, Computational characterization of lightweight multilayer MXene Li-ion
battery anodes. Applied Physics Letters, 2016. 108(2): p. 023901.
Halim, J., et al., X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes).
Applied Surface Science, 2016. 362: p. 406-417.
Xie, Y. and P. Kent, Hybrid density functional study of structural and electronic properties of functionalized Ti n+ 1
X n (X= C, N) monolayers. Physical Review B, 2013. 87(23): p. 235441.
Enyashin, A. and A. Ivanovskii, Atomic structure, comparative stability and electronic properties of hydroxylated
Ti2C and Ti3C2 nanotubes. Computational and Theoretical Chemistry, 2012. 989: p. 27-32.
Magne, D., et al., Spectroscopic evidence in the visible-ultraviolet energy range of surface functionalization sites
in the multilayer Ti 3 C 2 MXene. Physical Review B, 2015. 91(20): p. 201409.
Harris, K.J., et al., Direct measurement of surface termination groups and their connectivity in the 2D MXene
V2CT x using NMR spectroscopy. The Journal of Physical Chemistry C, 2015. 119(24): p. 13713-13720.
Hope, M.A., et al., NMR reveals the surface functionalisation of Ti 3 C 2 MXene. Physical Chemistry Chemical
Physics, 2016. 18(7): p. 5099-5102.
Mashtalir, O., et al., The effect of hydrazine intercalation on the structure and capacitance of 2D titanium carbide
(MXene). Nanoscale, 2016. 8(17): p. 9128-9133.
Wang, K., et al., Fabrication and thermal stability of two-dimensional carbide Ti3C2 nanosheets. Ceramics
International, 2016. 42(7): p. 8419-8424.
Mashtalir, O., et al., Dye adsorption and decomposition on two-dimensional titanium carbide in aqueous media.
Journal of Materials Chemistry A, 2014. 2(35): p. 14334-14338.
Naguib, M., et al., One-step synthesis of nanocrystalline transition metal oxides on thin sheets of disordered
graphitic carbon by oxidation of MXenes. Chemical communications, 2014. 50(56): p. 7420-7423.23
Rakhi, R.B., et al., Effect of postetch annealing gas composition on the structural and electrochemicalproperties of Ti2CT x MXene electrodes for supercapacitor applications. Chemistry of Materials, 2015. 27(15): p.
-5323.
Lipatov, A., et al., Effect of synthesis on quality, electronic properties and environmental stability of individual monolayer Ti3C2 MXene flakes. Advanced Electronic Materials, 2016. 2(12): p. 1600255.
Chae, Y., et al., An investigation into the factors governing the oxidation of two-dimensional Ti 3 C 2 MXene.Nanoscale, 2019. 11(17): p. 8387-8393.
Sang, X., et al., Atomic Defects in Monolayer Titanium Carbide (Ti3C2Tx) MXene. ACS Nano, 2016. 10(10): p.9193-9200.
Ying, Y., et al., Two-dimensional titanium carbide for efficiently reductive removal of highly toxic chromium (VI)from water. ACS applied materials & interfaces, 2015. 7(3): p. 1795-1803.
Wang, L., et al., Synthesis and electrochemical performance of Ti3C2Tx with hydrothermal process. Electronic Materials Letters, 2016. 12(5): p. 702-710.
Zhang, T., et al., Synthesis of two-dimensional Ti3C2Tx MXene using HCl+LiF etchant: Enhanced exfoliation and delamination. Journal of Alloys and Compounds, 2017. 695: p. 818-826.
Ghosh, M., et al., Single-Step Synthesis of Exfoliated Ti3C2Tx MXene through NaBF4/HCl Etching as Electrode Material for Asymmetric Supercapacitor. ChemistrySelect, 2022. 7(19): p. e202201166.
Li, T., et al., Fluorine-Free Synthesis of High-Purity Ti3C2Tx (T=OH, O) via Alkali Treatment. Angewandte Chemie International Edition, 2018. 57(21): p. 6115-6119.
Xu, S., et al., Binder-free Ti3C2Tx MXene electrode film for supercapacitor produced by electrophoretic deposition method. Chemical Engineering Journal, 2017. 317: p. 1026-1036.
Lemine, A.S., et al., Graphene a promising electrode material for supercapacitors—A review. International Journal of energy research, 2018. 42(14): p. 4284-4300.
Kouchachvili, L., W. Yaïci, and E. Entchev, Hybrid battery/supercapacitor energy storage system for the electric
vehicles. Journal of Power Sources, 2018. 374: p. 237-248.
Simon, P. and Y. Gogotsi, Materials for electrochemical capacitors. Nanoscience and technology: a collection of reviews from Nature journals, 2010: p. 320-329.
Lukatskaya, M.R., et al., Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide. Science, 2013. 341(6153): p. 1502-1505.
Levi, M.D., et al., Solving the capacitive paradox of 2D MXene using electrochemical quartz‐crystal admittance and in situ electronic conductance measurements. Advanced Energy Materials, 2015. 5(1): p. 1400815.
Come, J., et al., Controlling the actuation properties of MXene paper electrodes upon cation intercalation. Nano Energy, 2015. 17: p. 27-35.
Shen, B.-S., et al., All-solid-state flexible microsupercapacitor based on two-dimensional titanium carbide. Chinese Chemical Letters, 2016. 27(10): p. 1586-1591.
Peng, Y.-Y., et al., All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage. Energy & Environmental Science, 2016. 9(9): p. 2847-2854.
Lukatskaya, M.R., et al., Probing the mechanism of high capacitance in 2D titanium carbide using in situ X‐ray absorption spectroscopy. Advanced Energy Materials, 2015. 5(15): p. 1500589.
Xia, F., et al., Two-dimensional material nanophotonics. Nature Photonics, 2014. 8(12): p. 899-907.
Xie, Y., et al., Prediction and characterization of MXene nanosheet anodes for non-lithium-ion batteries. ACS nano, 2014. 8(9): p. 9606-9615.
Dall'Agnese, Y., et al., High capacitance of surface-modified 2D titanium carbide in acidic electrolyte. Electrochemistry Communications, 2014. 48: p. 118-122.
Kent, P., et al., Two-dimensional, ordered, double transition metals carbides (MXenes). APS, 2016. 2016: p. X15. 004.
Zhao, M.Q., et al., Flexible MXene/carbon nanotube composite paper with high volumetric capacitance. Advanced materials, 2015. 27(2): p. 339-345.
Boota, M., et al., Pseudocapacitive electrodes produced by oxidant‐free polymerization of pyrrole between the layers of 2D titanium carbide (MXene). Advanced Materials, 2016. 28(7): p. 1517-1522.
Dall’Agnese, Y., et al., Capacitance of two-dimensional titanium carbide (MXene) and MXene/carbon nanotube composites in organic electrolytes. Journal of Power Sources, 2016. 306: p. 510-515.
Lin, Z., et al., Capacitance of Ti3C2Tx MXene in ionic liquid electrolyte. Journal of Power Sources, 2016. 326: p. 575-579.
Nan, J., et al., Nanoengineering of 2D MXene‐Based Materials for Energy Storage Applications. Small, 2019.
Zhang, X., Z. Zhang, and Z. Zhou, MXene-based materials for electrochemical energy storage. Journal of energy chemistry, 2018. 27(1): p. 73-85.
Kang, R., et al., Enhanced thermal conductivity of epoxy composites filled with 2D transition metal carbides (MXenes) with ultralow loading. Scientific reports, 2019. 9(1): p. 1-14.
Zhang, Y., et al., Circuit board-like CoS/MXene composite with superior performance for sodium storage. Chemical Engineering Journal, 2019. 357: p. 220-225.
Dall’Agnese, Y., et al., Two-dimensional vanadium carbide (MXene) as positive electrode for sodium-ion capacitors. The journal of physical chemistry letters, 2015. 6(12): p. 2305-2309.
Simon, P., Two-Dimensional MXene with Controlled Interlayer Spacing for Electrochemical Energy Storage. ACS Nano, 2017. 11(3): p. 2393-2396.24
Zou, G., et al., Synthesis of MXene/Ag composites for extraordinary long cycle lifetime lithium storage at high rates. ACS applied materials & interfaces, 2016. 8(34): p. 22280-22286.
Naguib, M., et al., Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2. Advanced Materials, 2011. 23(37): p. 4248-4253.
Er, D., et al., Ti3C2 MXene as a High Capacity Electrode Material for Metal (Li, Na, K, Ca) Ion Batteries. ACS Applied Materials & Interfaces, 2014. 6(14): p. 11173-11179.
Xie, Y., et al., Role of Surface Structure on Li-Ion Energy Storage Capacity of Two-Dimensional Transition-Metal
Carbides. Journal of the American Chemical Society, 2014. 136(17): p. 6385-6394. 169. Sun, D., et al., Two-dimensional Ti3C2 as anode material for Li-ion batteries. Electrochemistry Communications,
47: p. 80-83.
Lukatskaya, M., et al., M. naguib, P. Simon, MW Barsoum, Y. Gogotsi. Science, 2013. 341: p. 1502.
Ren, C.E., et al., Porous Two-Dimensional Transition Metal Carbide (MXene) Flakes for High-Performance Li-Ion
Storage. ChemElectroChem, 2016. 3(5): p. 689-693.
Luo, J., et al., Sn4+ Ion Decorated Highly Conductive Ti3C2 MXene: Promising Lithium-Ion Anodes with Enhanced Volumetric Capacity and Cyclic Performance. ACS Nano, 2016. 10(2): p. 2491-2499.
Ahmed, B., et al., Atomic layer deposition of SnO2 on MXene for Li-ion battery anodes. Nano Energy, 2017. 34: p. 249-256.
Pan, H., Electronic properties and lithium storage capacities of two-dimensional transition-metal nitride monolayers. Journal of Materials Chemistry A, 2015. 3(43): p. 21486-21493.
Chen, X., et al., Proposing the prospects of Ti 3 CN transition metal carbides (MXenes) as anodes of Li-ion batteries: a DFT study. Physical Chemistry Chemical Physics, 2016. 18(48): p. 32937-32943.
Yabuuchi, N., et al., Research Development on Sodium-Ion Batteries. Chemical Reviews, 2014. 114(23): p. 11636- 11682.
Su, D.S. and G. Centi, A perspective on carbon materials for future energy application. Journal of Energy Chemistry, 2013. 22(2): p. 151-173.
Yu, X.-f., et al., Mg intercalation into Ti2C building block. Chemical Physics Letters, 2015. 629: p. 36-39.
Wu, Y., et al., MoS2-Nanosheet-Decorated 2D Titanium Carbide (MXene) as High-Performance Anodes for Sodium-Ion Batteries. ChemElectroChem, 2017. 4(6): p. 1560-1565.
Guo, X., et al., Sb 2 O 3/MXene (Ti 3 C 2 T x) hybrid anode materials with enhanced performance for sodium-ion batteries. Journal of Materials Chemistry A, 2017. 5(24): p. 12445-12452.
Naguib, M., et al., Electrochemical performance of MXenes as K-ion battery anodes. Chemical Communications, 2017. 53(51): p. 6883-6886.
