Study of optical properties for five ring hexagonal photonic crystal fiber
Keywords:
photonic crystal fiber, refractive index, confinement loss, waveguide dispersionAbstract
In this paper, basically, we have investigated about different optical properties for five-ring hexagonal photonic crystal fiber. Silica glass as material for PCF is taken and different parameters analyzed like, Effective refractive index, confinement loss and Waveguide dispersion. Properties are analyzed by varying the key design parameters like air hole diameter and lattice pitch. The comparative study of the results for different design parameters is analyzed. It has been observed that the value of effective refractive index (neff), confinement loss and waveguide dispersion is decreases as we increases the diameters and decreases the value of lattice pitch. Further we discusses about the effectiveness of varying the key parameters on different optical properties.References
Biswas S rafi R S, Al amin, Md.A and Alam S.,(2015) Analysis of Effect of Air Hole Diameter and Lattice Pitch in Optical Propertise for Hexagonal Photonic Crystal Fiber.Optics and Photonics Journal 5,227-333
Yang, S.G., Zhang, Y.J., Peng, X.Z., Lu, Y., Xie, S.Z., Li, J.Y., Chen, W., Jiang, Z.W., Peng, J.G. and Li, H.Q.’’ Theoretical Study and Experimental Fabrication of High Negative Dispersion Photonic Crystal Fiber with Large Area Mode Field.’’ Optics Express, 14, 3015-3023
Olyaeea, S., Sadeghib, M. and Taghipoura, F. (2012) Design of Low-Dispersion Fractal Photonic Crystal Fiber. International Journal of Optics and Photonics, 6, 57-64
Namihira, Y., Hossain, Md.A., Liu, J.j., Koga, T., Kinjo, T., Hirako, Y., Begum, F., Kaijage, S.F., Razzak, S.M.A. and Nozaki, S. (2011) Dispersion Flattened Nonlinear Square Photonic Crystal Fiber for Dental Oct. IET International Conference on Communication Technology and Application (ICCTA), Beijing, 14-16 October 2011, 819-823
Agarwal, P. (2013) Modeling of Elliptical Air Hole Pcf for Lower Dispersion. Advance in Electronic and Electric Engineering, 3, 439-446.
C. M. Jewart, S. M. Quintero, A. M. B. Braga, and K. P. Chen, “Design of a highly-birefringent microstructured photonic crystal fiber for pressure monitoring,” Opt. Express 18, 25657–25664 (201
H. Bao, K. Nielsen, H. K. Rasmussen, P. Uhd Jepsen, and O. Bang, “Design and optimization of mechanically down-doped terahertz fiber directional couplers,” Opt. Express 22, 9486–9497 (2014).
M. S. Islam, S. Rana, M. R. Islam, M. Faisal, H. Rahman, and J. Sultana, “Porous core photonic crystal fiber for ultra-low material loss in THz regime,” IET Commun. 10, 2179–2183 (2016
Junjun Wu, Shuguang Li, Xinyu Wang, Min Shi, Xinxing Feng, and Yundong Liu, "Ultrahigh sensitivity refractive index sensor of a D-shaped PCF based on surface plasmon resonance,"Applied Optics 57(15) (2018).
Ahmmed A. Rifat, Rajib Ahmed, Ali K. Yetisen, Haider Butt, Aydin Sabouri, G. Amouzad Mahdiraji, Seok Hyun Yun, F.R. Mahamd Adikan, "Photonic crystal fiber based plasmonic sensors," Sensors andActuators B 243, 311–325, (2017)
TanZ,LiX,ChenY,FanP(2014)Improvingthesensitivityoffiber surface plasmonresonance sensor byfilling liquid in a hollow core photonic crystal fiber. Plasmonics 9(1):167–173
LuanN,WangR,LuY,YaoJ(2014)Simulationofsurfaceplasmon resonance temperature sensor based on liquid mixture-filling microstructured optical fiber. Opt Eng 53(6):06710
